SM52 Numbering Form Roller 38mm Hans Gronhi It features a hinged rear

It features a hinged rear section for easy removal of stopped sheets

the box has 15 rolls at 13 metres per roll

Tensioning will always need to be adjusted for the new belt and this is carried out by loosening the clamp screws in the front face of the motor and rotating the whole motor body

Each assembly come pre drilled for correct pre-tension of the washers

This 1/4 turn tap screws into the fount pan on the underside

SM52 Numbering Form Roller 38mm Hans Gronhi It features a hinged rearJust as all of our Press Parts rollers, this is covered with an ideal compound which has been carefully researched to match the performance of the original roller, and supplied with new bearings fitted. Please also look at our fully interactive roller guide also on this site. A spindle charge of 15. 87 will be added when buying the roller, this is refunded in full if the old roller is returned to us. (subject to condition) Heidelberg equivalent: G2.